Beta

Use Jira with an AI Browser for Lead List Building

Run lead list building in Strawberry using Jira as one of the inputs. Specific surfaces, example prompt, real output, and tradeoffs vs alternatives.

If you use Jira and you regularly need to build a verified lead list, the bottleneck is usually the same: Jira holds part of the context, but lead list building also needs signals that live outside it - on the public web, in LinkedIn, in news, in other connected apps. Strawberry is built to combine the Jira context with the rest of the browser, and run the full workflow as a companion you can re-trigger every week.

This page describes specifically how Strawberry handles lead list building when Jira is one of the inputs. It names the Jira surfaces involved, the signals the workflow actually needs, an example prompt you can paste, and what a good output looks like.

The job a SDR, marketer, founder doing outbound is trying to do

The goal of lead list building is to produce a clean, enriched, dedup'd list of N contacts who match ICP and have at least one buying signal. The success metric is concrete: bounce rate below 5%, dedup rate above 95%, and at least 30% of leads with a fresh signal. That definition matters because it shapes what Jira needs to contribute to the workflow.

What signals lead list building actually needs

For each signal below, here is whether Jira can contribute directly or whether Strawberry has to find it via the browser:

  • ICP criteria (industry, size, geo, stack) - Jira does not contain this directly. Strawberry uses the browser plus public sources to fetch it.
  • Title match including variants (Head of, VP, Director of) - Jira does not contain this directly. Strawberry uses the browser plus public sources to fetch it.
  • Verified email pattern - Jira does not contain this directly. Strawberry uses the browser plus public sources to fetch it.
  • Phone number (when reachable from source) - Jira does not contain this directly. Strawberry uses the browser plus public sources to fetch it.
  • Recent buying signals (hiring, funding, product launch) - Jira does not contain this directly. Strawberry uses the browser plus public sources to fetch it.
  • Existing CRM membership (to filter out already-contacted) - Jira does not contain this directly. Strawberry uses the browser plus public sources to fetch it.

What Strawberry can do inside Jira

Strawberry can run JQL queries, summarize sprint status, and create issues from external context.

Jira surfaces Strawberry uses for this workflow: issues, epics, sprints, boards, JQL queries.

How Strawberry runs lead list building with Jira

  1. Strawberry opens the Jira issues that contains the relevant context.
  2. The companion pulls related context from Jira (epics, history, attached files) where it exists.
  3. For the parts Jira does not store, Strawberry uses the browser - web search, LinkedIn, news, the prospect's website.
  4. Strawberry synthesises the output in the shape this workflow needs: A CSV or sheet with one row per lead.
  5. A human reviews before any external action (send, update, post). Then the approved output is saved back to Jira or your system of record.

Example Strawberry prompt

Paste this in a new Strawberry chat with Jira connected. Adjust the specifics to your actual ICP, role, or topic.

Read this Jira issues and any linked context.
Then run a full lead list building workflow on it. Use the browser to fill any gaps not in Jira.
Return the output in the shape we use for lead list building: A CSV or sheet with one row per lead: name, title, company, email, LinkedIn URL, signal, source.
Do not send anything externally. Save the draft to me to review.

What a good lead list building output looks like

Here is what a finished output for lead list building should look like in practice. The specifics will change for your use case, but the shape should look similar:

  • Goal: 75 Head of Growth contacts at Series A-B SaaS in DACH
  • Sources: a CRM-clean filter, a ZoomInfo/Apollo enriched pull, and a LinkedIn sweep with manual review
  • Output: Google Sheet 'DACH-growth-2026-W23' with columns name, title, company, work email, LinkedIn URL, signal (hiring or funding), source notes

Why Jira for this, and where to use a different tool

Jira is strong for this workflow because Strawberry can run JQL queries, summarize sprint status, and create issues from external context.

Where Jira falls short Jira custom fields and permission schemes are notoriously project-specific; Cloud vs Data Center auth differs.

Consider also a CRM for go-to-market follow-up.

Common mistakes when running lead list building

  • Guessing email patterns and getting bounced
  • Including duplicates because the source mixes work and personal emails
  • Padding the list with leads who don't match ICP just to hit a count target

Connecting Jira to Strawberry

Atlassian OAuth - Jira + Confluence share the same connection. Once connected, the companion can read the surfaces above without re-authenticating, and any write action still requires explicit human approval the first time the workflow runs.

Caveats

Do not let any AI agent send emails, update CRM records, or change shared systems without a clear approval step. Strawberry is strongest when the workflow combines browser context with connected-app context and a human review for sensitive actions.

How Jira + Strawberry runs lead list building

1 Jira

Read

Open the relevant Jira issues; pull related context.

2 Browser

Augment

Use the browser, LinkedIn, news, and other connected apps for signals outside the CRM/tool.

3 Output

Compose

Synthesise into the lead list building shape: A CSV or sheet with one row per lead.

4 Human

Approve

Human reviews before any external action; approved output is saved back.

FAQ - Jira + AI browser for lead list building

Can Strawberry do lead list building entirely inside Jira?

No, and that is the point. lead list building needs signals Jira does not store - public web, LinkedIn, news, other apps. Strawberry combines Jira with the browser, which is where the real value comes from.

Does Jira need to be the primary CRM or system of record?

Not necessarily. Jira can be one input among several. Strawberry can read it as context even if your primary system of record is somewhere else.

What permissions do I need on Jira?

Read access to the surfaces you want Strawberry to use (issues, epics, sprints). Write permissions are only needed if you want Strawberry to update Jira after a human approves the change. Atlassian OAuth - Jira + Confluence share the same connection.

What is the realistic success metric for lead list building?

bounce rate below 5%, dedup rate above 95%, and at least 30% of leads with a fresh signal - that is the target Strawberry helps you hit, not the only thing it measures.

What is the biggest mistake to avoid?

Guessing email patterns and getting bounced.

Run lead list building in 10 minutes with Strawberry and Jira

  1. Open Jira

    Connect Jira so Strawberry can read issues, epics, sprints, boards, JQL queries, custom fields and combine them with the rest of the brief. Pin the specific records or views you want to start from so the agent does not drift.

  2. Tell Strawberry the brief

    Drop the prompt below. Replace the placeholder with the actual SDR, marketer, founder doing outbound target - one name, one URL, or one Jira reference is enough. Keep the goal explicit: produce a clean, enriched, dedup'd list of N contacts who match ICP and have at least one buying signal

  3. Let it gather signals

    Strawberry pulls ICP criteria (industry, size, geo, stack) and title match including variants (Head of, VP, Director of), then layers public web sources in parallel. You should see citations next to each fact - that is the audit trail. Watch the Jira side: Jira custom fields and permission schemes are notoriously project-specific; Cloud vs Data Center auth differs

  4. Review before write-back

    Output lands in the shape you asked for: A CSV or sheet with one row per lead: name, title, company, email, LinkedIn URL, signal, source. Read it once. Fix anything off. The success metric is bounce rate below 5%, dedup rate above 95%, and at least 30% of leads with a fresh signal - if the draft does not hit that bar, send it back with a one-line correction.

  5. Save it as a routine

    If you will build a verified lead list this again next week, click Save as routine. Pick a cadence (daily, weekly, on-trigger). Strawberry re-runs the whole flow on schedule and pings you when the new output is ready.

Paste-ready prompt for lead list building with Jira

You are helping me build a verified lead list lead list building. Use Jira as one input and the public web for the rest.

Target: [paste one SDR, marketer, founder doing outbound target here - a Jira reference, a name + company, or a URL]

Goal: produce a clean, enriched, dedup'd list of N contacts who match ICP and have at least one buying signal

Signals to gather:
- ICP criteria (industry, size, geo, stack)
- title match including variants (Head of, VP, Director of)
- verified email pattern
- phone number (when reachable from source)
- recent buying signals (hiring, funding, product launch)
- existing CRM membership (to filter out already-contacted)

Output shape: A CSV or sheet with one row per lead: name, title, company, email, LinkedIn URL, signal, source

Rules:
- Cite every fact with a link or a Jira reference. If you cannot find a signal, say so explicitly rather than guessing.
- Do not invent specifics. Use real, dated signals from the last 90 days where possible.
- If a fact would change the outcome and is missing, pause and ask me before writing the final output.

When the output is ready, surface it in this chat. Do not write back to Jira or send anything externally until I approve.

Paste this into Strawberry's chat field. Replace the target placeholder before running.

When Jira + Strawberry is the right combo for lead list building

Jira is the enterprise issue tracker. Strawberry can run JQL queries, summarize sprint status, and create issues from external context. For lead list building specifically, that means the agent already has issues, epics, sprints, boards, JQL queries, custom fields as starting context - you do not need to brief it from scratch.

When it is NOT a fit

  • You need a single number, not a synthesised brief. A SQL query against your warehouse is faster.
  • The decision is happening in the next 60 seconds. The agent is fast but it is not instant; for hard real-time use, do it manually.
  • The Jira data you would feed in is stale or wrong. Garbage in, confident garbage out.

Three mistakes to avoid

  1. guessing email patterns and getting bounced
  2. including duplicates because the source mixes work and personal emails
  3. padding the list with leads who don't match ICP just to hit a count target

Honest tradeoff

Jira custom fields and permission schemes are notoriously project-specific; Cloud vs Data Center auth differs. If you are running this at scale (10+ briefs per day), batch the inputs and let Strawberry process them as a routine instead of one-by-one prompts - cheaper per brief and the output stays consistent.

What a real output looks like

Goal: 75 Head of Growth contacts at Series A-B SaaS in DACH,Sources: a CRM-clean filter, a ZoomInfo/Apollo enriched pull, and a LinkedIn sweep with manual review,Output: Google Sheet 'DACH-growth-2026-W23' with columns name, title, company, work email, LinkedIn URL, signal (hiring or funding), source notes
Download